MetalQuality is our primary concern for your satisfaction

Flat Steel Products


Corrugated Roofing Sheets











We supply Galvanised Corrugated Steel Roofing Sheets in different sizes and Length.
The Standard specifications are as follows :
Size (Thickness) : 0.11 mm to 1.2 mm
Width : 750 mm to 1220 mm
Zinc Coating Z10 to Z27 (90 gsm to 275gsm) as per GIS 3302-1994
Tolerance on Thickness : As per table 15of GIS 3302-1994
Tolerance on Width : +7mm,-0 mm
Tolerance on Length : +15 mm,-0mm
Tolerance on Mass : As per cl.13.4 of GIS 3302-1994
Dimensional Tolerance
Width of Corrungation : +25 mm,-10 mm
Depth of Corrungation : +1.5 mm
Pitch of Corrungation : +2 mm
Packing
Galv roofing sheets are packed in Sea Worthy Packing. They are wrapped firstly with Bituminished Plastic (Hessian) cloth all four side secondly ,boxing with GP sheets and thirdly strapping with 19mm MS annealed strip over three points width wise and two points over length wise, to give it extra protection.

Galvanized Steel Coils











We supply Galvanised Steel Coils in different thickness and widths.
The Standard specifications are as follows ::
Size (Thickness) : 0.11 mm to 1.2 mm
Width : 750 mm to 1220 mm
Zinc Coating : Z10 to Z27(90 gsm to 275gsm)as per GIS 3302-1994
Tolerance on Thickness : As per table 15of GIS 3302-1994
Tolerance on Width : +7mm,-0 mm
Tolerance on Mass : +/- 5%
Packing
Galvanised Steel coils are packed in Sea Worthy Packing. First there is Double wrapping of plastic & HDPE cloths, Strapping of MS annealed strip of 19 mm at 3 points over 120 degree of ID & OD rings on both sides including steel sheets over the circumference will be provided before steel strapping, to give it extra protection.

Aluzinc (Galume) Coils / sheets











We supply Aluzinc coils / sheets as per following specs.
Available as per DIN/ASTM/JIS/EN and equivalent. In full hard, semi hard and soft quality (commercial grade, lock forming grade and structural grade)
Zinc Coating : 50 AZM to 150 AZM
Thickness Hard Coils : 0.14mm to 3.00mm
Soft Coils : 0.20mm to 3.00mm
Width : 1250 maximum

Aluminium Coils / sheets











We supply Aluminium coils / sheets as per following specs.
Grade: Roofing Grade
Alloy : AA 8011 , AA 3105
Thickness :0.23 MM upto 1.5 MM
Width : 457mm/ 610mm/ 750mm/914mm/1000mm/1220mm ( also can be supplied as per customers requirement ) maximum width capacity 1220mm.
Supply Condition: Plain / Corrugated
Length: As per customers requirement

Prepainted coils / Sheets











We supply Prepainted coils / Sheets in Galvanised as well in Aluzinc, as per the various RAL
No's or as per the Sample provided.
The Corrugations on these Prepainted Sheets are possible in various lengths and in various shapes and profiles.
The PPGI / PPAZ coils & sheets are coloured / painted from BOTH sides.
The standard paint specs are:
* Top Side Painted with :- 5-7 Microns Primer + 18-20 Microns Coating / Paint
* Back Side Painted with :- 5-7 Microns Grey paint.

Cold Rolled Steel Coils / Sheets :











We supply CR coils and sheets as per following specs.:
Thickness of 0.3mm upto 1.5mm .
CR Sheets in standard size of 1220mm x 2440mm

Hot Rolled coils / Steel :











We supply HR coils and sheets as per following specs.:
Thickness 1.2mm onwards for HR sheets
HR Sheets in standard sizes of 1000mm x 2000mm and also 1225mm x 2450mm.
Thickness 8mm upto 50mm for HR Plates
HR Plates in standard width of 1000mm upto 1500mm